Artograph LED 500 Owners Manual - Manual (Page 18)

18 PREPARATION
Kensington Security System
y y This projector has a Kensington Security System Connector on the panel. Connect a
Kensington Security System cable as below.
y y For detailed installation and use of the Kensington Security System, refer to the
user’s guide included with the Kensington Security System set.
y y The Kensington Security System is an optional item.
y y What is Kensington?
Kensington is a company that sells security systems that prevent expensive elec-
tronic equipment such as a computer or laptop from being stolen.
Internet Homepage: http://www.kensington.com
How to Install the Projector Using a Tripod
y y You can install this projector using a camera tripod.
As shown below, you can mount the projector instead of a camera on the tripod.
y y When stabilizing the tripod, we recommend using the locking bolt of standard size 4.5
mm or less. The maximum size allowed for the locking bolt is 5.5 mm. (If it is longer
than the maximum allowed size, it may damage the projector.)
+
⇒
The projector is connected
to this part.
Tripod
Bolt used to fix
the projector
Bottom side of the
projector