Artograph LED 500 Owners Manual - Manual (Page 24)

24 Using the PROJECTOR
Blank Function
Using the Blank Function
This function may be effective when you
need to draw attention during a meeting
or training.
1
Press the BLANK button, and the
screen is covered by the background
color.
You can change the background
color by referring to "Selecting a
Blank Image".
2
Press any button to clear the blank
function.
To cover the screen temporarily, press
the
BLANK button on the remote
control.
Do not block the lens with any object
while the projector is running.
It may become overheated and de-
formed or even cause a fire.
Selecting a Blank Image
1
Press the SETTINGS button.
2
Press the ︿, ﹀, ︿ or ﹀ button to
select OPTION and press the OK
button.
3
Press the ︿, ﹀, ︿ or ﹀ button to
select Blank Image and press the
OK button.
4
Use the ︿, ﹀ button to move to the
setting or option you want and press
the
OK button.
Using the Quick Menu
You can customize frequently used
menus.
1
Press Q.MENU to access the quick
menus.
2
Press the ︿ or ﹀ button to scroll
through the following menus and
press
OK.
Menu Description
Aspect
Ratio Resizes an image.
(see page22)
Picture
Mode Changes the picture
mode. (see page46)
Energy
Saving Adjusts brightness.
Clear
Voice II Makes the voice from the
projector crisp and clear.
Sound
Mode Set each option as de-
sired.
Sleep
Timer The projector is turned off
at the preset time.
PJT Mode Turns the projected image
upside down or flips it
horizontally.
USB
Device Disconnects a USB
device.
The menu is displayed
only when the USB device
is connected.
3
Press the ︿, ﹀, ︿, or ﹀ button to
scroll through the following menus.