Artograph LED 500 Owners Manual - Manual (Page 22)

22 Using the PROJECTOR
Using Additional Options
Adjusting Aspect Ratio
Resize an image to view at its optional
size. You can change the image size by
pressing
Q.MENU or SETTINGS while
you are using the projector.
NOTE
y y Some options may not be available
depending on input signals.
-
FULL: Changes to the full screen
regardless of the aspect ratio.
-
16:9: Resizes images to fit the
screen width.
-
Just Scan: Displays video images in
the original size without cutting off
the edges.
NOTE
y y If you select Just Scan, you may see
image noises at the edge or edges
of the screen.
-
Set By Program: Displays images in
the same aspect ratio as the original
image.
-
4:3: Resizes images to the 4:3
aspect ratio.
-
Zoom: Enlarges an image to fit the
screen width. The top and bottom of
the image may be truncated.
y y Press the ︿ or ﹀ button to zoom in
or out of the image.
y y Press the ︿ or ﹀ button to move
the image.
-
Cinema Zoom: Formats an image
to the cinemascope ratio, 2.35:1. It
ranges from 1 to 16.
y y Press the ︿ or ﹀ button to zoom in
or out of the image.
y y Press the ︿ or ﹀ button to move
the image.
NOTE
y y If you enlarge or reduce an image,
the image may be distorted.