Atop Technology MB5416A2 User manual - Manual (Page 15)

Atop Modbus Gateway
MB54XX-X Series
User’s Manual V 1.1
12
2.3 First Time Installation
Before installing the device, please adhere to all safety procedures described below, Atop will
not be held liable for any damages to property or personal injuries resulting from the
installation or overall use of the device. Do not attempt to manipulate the product in any way if
unsure of the steps described here, in such cases please contact your dealer immediately.
1. Prepare the necessary cables, DC adapter, power cord, LAN cable, etc.; do not connect
the unit yet.
2. Plug in the Power Supply/Adapter (MB5404D-X/MB5404D-Sis-X) or AC power cord
(MB5408/5416-X) to a power outlet and turn on the power switch (please make sure the
electric outlet has proper grounding so as to not cause damage to the unit, property or
yourself); shortly thereafter the unit will beep once and the LCM Display will show a .
3. Within one minute, the buzzer shall beep once, and the LCM Display shall show the
model’s name.
4. Connect LAN1 to a network switch or to your LAN network with a UTP cable, and
connect a host PC to your LAN network with another cable.
5. Connect a serial device to one of the serial ports, and make sure a correct cable is used
(Pin assignments for a RS-232 device and for a RS-485 cable are shown in )
For more information on how to install the device, please refer to the Installation Guide
available in your package.