Atop Technology MB5416A2 User manual - Manual (Page 32)

Atop Modbus Gateway
MB54XX-X Series
User’s Manual V 1.1
29
Fig. 3. 12
 VCOM inactivity’s Time Out can be set as well (which is the period of time allowed
between actions), with a maximum of 600 minutes or 10 hours. If no action has been
taken after this period, VCOM connection will be automatically interrupted by the system.
It is important to note that alternatively, these settings can be chosen to be applied to All
VCOMs if needed by checking the last box on the options.
Fig. 3. 13
Click on Save Configuration to keep all changes made.