Menu – Atop Technology MB5416A2 User manual User Manual
Page 22
Atop Modbus Gateway
MB54XX-X Series
User’s Manual V 1.1
19
3.2.1 LCM (Liquid Crystal Matrix) Configuring (MB5408-X/5416-X only)
The device also has the option of manual configuration (without the software), by making use
of its interactive console. Using this method is however, very easy and intuitive; buttons and
their functions are described next.
Table 3. 1
Buttons
Button Description
Menu
<Menu>
Open Main Menu, or to return to the previous Menu
<Up>
Scroll up
<Down>
Scroll down
SEL
<SEL>
Select
Example
To change the device’s IP address, follow the approach below.
Press <Menu> to enter Main Menu
Press <Down> to scroll down to 2. Network Set
Press <SEL> to enter Network setting and then <Up>/<Down> to scroll up or down to
LAN1
Press <SEL> to enter LAN1 and then <Down> to scroll down to 1. IP Config
Press <SEL> to enter LAN1 IP Config and then press <Down> to scroll down to 1.
Static, finally press <SEL> to save the selection.
Press <SEL><Down> to enter 2. IP Address. Use <Up>/<Down> to increase or
decrease the Digital of IP Address, press <Menu> to return to one level higher after
completion