Atop Technology MB5416A2 User manual - Manual (Page 26)

Atop Modbus Gateway
MB54XX-X Series
User’s Manual V 1.1
23
3.2.2 Configure Automatic IP Assignment with DHCP
A DHCP server can automatically assign addresses to LAN1 or LAN2, the Subnet Mask, and
the Gateway. You can simply check “DHCP” box in the Network Setting dialog using our
Device View© utility and then restart it; once restarted it will be automatically configured.
3.3 Web Overview
In this section, only current information on the device’s status and settings will be displayed.
Fig. 3. 7
 Model Name as its name implies, shows the device’s model.
 Device Information displays information on the Kernel version, as well as the AP
 Network Information here you may find the Mode in which the device is currently
working on (Dual Subnet, Redundancy Mode), and both LANs respective MAC and IP
addresses.
 Dual Subnet Mode: in which two Ethernet ports have separate IP addresses and
subnets
 Redundancy Mode: the system will just use one port for data transfer, if this port is
disconnected, the whole system will change to another port automatically.