Pro control – Auto Meter 5646 User Manual

Page 4

Advertising
background image

pro Control

The Pro Control feature activates a switched ground output at a user defined set point. Pro Control can be used to switch on a relay to activate

ignition kill, cooling fans, lamps, alarms, etc. The set points define three regions on the gauge dial, the region below the low set point, between the

set points, and above the high set point.

warning: Pro Control outputs shall not

exceed 2.0 amps at 12 volts

REGION A

REGION B

HIGH

REGION C

LOw

Low Set Point - ACTIVE STATE LOW (orange wire)

Pointer region

Pro Control output

#1

normally open

Contact

normally Closed

Contact

Dial Color

a

active (on)

CLoSeD (on)

oPen (oFF)

Low warn Color

B

oFF

oPen (oFF)

CLoSeD (on)

Backlight Color

C

oFF

oPen (oFF)

CLoSeD (on)

High warn Color

Low Set Point - ACTIVE STATE HIGH (orange wire)

Pointer region

Pro Control output

#1

normally open

Contact

normally Closed

Contact

Dial Color

a

oFF

oPen (oFF)

CLoSeD (on)

Low warn Color

B

active (on)

CLoSeD (on)

oPen (oFF)

Backlight Color

C

active (on)

CLoSeD (on)

oPen (oFF)

High warn Color

High Set Point - ACTIVE STATE HIGH (BLue wire)

Pointer region

Pro Control output

#2

normally open

Contact

normally Closed

Contact

Dial Color

a

oFF

oPen (oFF)

CLoSeD (on)

Low warn Color

B

oFF

oPen (oFF)

CLoSeD (on)

Backlight Color

C

active (on)

CLoSeD (on)

oPen (oFF)

High warn Color

High Set Point - ACTIVE STATE LOW (BLue wire)

Pointer region

Pro Control output

#2

normally open

Contact

normally Closed

Contact

Dial Color

a

active (on)

CLoSeD (on)

oPen (oFF)

Low warn Color

B

active (on)

CLoSeD (on)

oPen (oFF)

Backlight Color

C

oFF

oPen (oFF)

CLoSeD (on)

High warn Color

+12v

Pro Control Low

Output (#1)

(Switched Ground)

Pro Control

Ground Neg. (-)

Relay: Dedenbear Part # HPR

87A

87

85

86

30

+12v

87A

87

85

86

30

Pro Control High Output (#2)

(Switched Ground)

Normally

Closed

Normally

Open

ORANGE

BLACK

BLUE

Normally

Closed

Normally

Open

5 4 3 2 1

10 9 8 7 6

The Super Bezel is a registered trademark of Auto Meter Products, Inc.

12 mONTH LImITED wARRANTy

Auto Meter Products, Inc. warrants to the consumer that all Auto Meter High Performance products will be free from defects in material and workmanship for a period of twelve (12) months from date of the

original purchase. Products that fail within this 12 month warranty period will be repaired or replaced at Auto Meter’s option to the consumer, when it is determined by Auto Meter Products, Inc. that the product

failed due to defects in material or workmanship. This warranty is limited to the repair or replacement of parts in the Auto Meter instruments. In no event shall this warranty exceed the original purchase price of

the Auto Meter instruments nor shall Auto Meter Products, Inc. be responsible for special, incidental or consequential damages or costs incurred due to the failure of this product. Warranty claims to Auto Meter

must be transportation prepaid and accompanied with dated proof of purchase. This warranty applies only to the original purchaser of product and is non-transferable. All implied warranties shall be limited in

duration to the said 12 month warranty period. Breaking the instrument seal, improper use or installation, accident, water damage, abuse, unauthorized repairs or alterations voids this warranty. Auto Meter

Products, Inc. disclaims any liability for consequential damages due to breach of any written or implied warranty on all products manufactured by Auto Meter.

SERVICE

For service send your product to Auto Meter in a well packed shipping carton. Please include a note explaining what the problem is along with your phone number. Please specify when you

need the product back. If you need it back immediately mark the outside of the box “RUSH REPAIR,” and Auto Meter will service product within two days after receiving it. ($10.00 charge will be

added to the cost of “RUSH REPAIR.”) If you are sending product back for Warranty adjustment, you must include a copy (or original) of your sales receipt from the place of purchase.

FOR SERVICE SEND TO: AUTO mETER pRODUCTS, INC. 413 W. Elm St., Sycamore, IL 60178 USA (866) 248-6357

Email us at [email protected]

http://www.autometer.com

2650-1459-00 07/07/09

© 2009 Auto Meter Products, Inc.

ExAmPLE

Advertising
This manual is related to the following products: