Auto Meter 6013 - Manual (Page 21)

Chapter 3. Operating the Display System
Race Dash Users Guide 15
Playback Menu
The Playback Menu is displayed by holding down Switch
3 while the dash is powered up. The most recent run
will be selected, eg,
The top line of the display shows the currently selected run, the
maximum number of runs recorded and the duration of the
selected run.
The bottom line shows the number of laps in the run and the best
lap time.
Select the run which you wish to reply using Switches 1 and 2 to
scroll through the available runs. Then press Switch 4 to start
replaying.
The Playback Menu will not be displayed if the Engine Speed is
running, ie, RPM is above zero.
A summary of the switch actions is shown in the table below:
Switch Action
1 Select the previous run
2 Select the next run
3 No action; used to enter Playback mode at
power-up
4 Play the selected run;
if there are no runs, it won't play
1 & 3 Delete all the runs (see Note below)
A confirmation is required before the runs are deleted; press
Switch 1 to cancel and Switch 2 to confirm. Once the runs are
deleted, the number of runs will show zero.
Exit from Playback Mode by switching off the power. If Switch
3 is not held when the power is restored, the unit will revert to
Normal display mode.