Warning – Autoquip SERIES 35 SCISSORS LIFT User Manual
Page 18
18
Prevent serious injury or death.
Depending on model, standard weight of lift ranges from 500 – 4700 lbs.
Use a properly rated lifting device to move and install lift.
4. Lower lift into pit and check for proper height. Lift must be solid and flush with pit curb angle framing
(D). If needed, shim to desired height. DO NOT “spot” shim. Shim along full length of frame. This will
prevent frame from sagging under load.
5. Remove the shipping bolt and eye bolts from the lift and hydraulically raise the platform. Failing to
remove the shipping bolts before operation will cause permanent damage to the lift.
Prevent serious injury or death.
Electrical service installation must be performed by a licensed
electrician and conform to all local and national electrical codes.
NOTE: For larger horsepower motors, consult factory.
Motor Details
Full Load Amps
HP
HZ
PH
RPM
Time Rating
115V
208V
230V
460V
1/2
60
1
1725
2 Min.
15.0
7.7
7.7
-
3/4
60
1
1725
2 Min.
16.6
8.3
8.3
-
1-1/2
60
1
3450
2 Min.
-
5.3
5.3
2.65
5
60
1
3600
2 Min.
-
15.8
14.8
7.4
5
60
1
1760
Continuous
-
13.6
12.6
6.3
^ WARNING
^ WARNING