Bakers Pride 616 Manual - Manual (Page 9)

9
INSTALLATION
RECEIVING
Check the package for damage. If any damage is visible you should mark the bill of lading you sign
that there may be concealed damage. Insure the container is upright. If the container is not upright ma-
jor damage can occur to your appliance. If damage is discovered, do not refuse delivery. Contact the
carrier and file appropriate freight claims. Do not contact the manufacturer. Shipping damage claims
are to be resolved between the customer, shipping carrier and dealer. The manufacturer may assist in
resolving any such claims, but such assistance does not relieve you of your responsibility.
Read the notice on the outside carton regarding damage in transit. Damage discovered after opening
the shipping container and inspecting the oven is “CONCEALED DAMAGE” and the carrier must be
notified immediately to send an inspector and also to furnish forms for the customer’s claim.
When the oven arrives it should consist of:
a. A crate or carton containing your new oven
b. A carton containing four legs with mounting hardware
c. A strapped skid containing baking decks and (if ordered) ceiling tiles
Place the oven and parts as close to the final installation area as possible. Your oven is normally
packed on its side or back. Leave it in this position while unpacking. The skid may be left in place
during unpacking and may be convenient in further handling. Unpack your oven carefully to avoid
damage. If concealed damage is found refer to the instructions above.