Bear Archery Compound Bow 2014 - Manual (Page 29)

26
CAM ADJUSTMENTS
- Adjusting Draw Length -
Rotating Module System
The rotating module cam system allows the bow to be
adjusted to all of its draw length positions without the use
of separate individual modules and does not require a bow
press for draw length adjustments at 1/2” increments. Draw
length changes are made by first removing the socket head
cap screws that secure the rotating module unit. Next, rotate
the module until the desired module draw length module
tick mark is lined up with the cam tick mark, and reinstall
the screws in the corresponding holes. Such draw length
adjustments will not affect peak draw weight. When the
rotating module unit is repositioned to adjust draw length,
the draw stop must also be moved to the corresponding
setting marked on the cam.