Bedrug JEEP KITS: BedRug for Jeep CJ7/YJ - Manual (Page 3)

BEDRUG, INC.
n
635 Old Hickory Blvd, Old Hickory, TN 37138-3162
n
800-462-8435
n
bedrug.com
installing MiDDle Floor PieCe
6. Adjust the front seats to the fully forward and tilted up (passenger entry) position.
Next place the rear floor piece into place. (Fig. 4 and Fig. 5)
7. Cut slits for the floor mounted seat belts to pass thru using indicator lines on the underside of the
rear floor piece, and push seat belts thru as shown. If equipped with factory plastic seat belt covers,
cut holes to accomodate. (Fig. 6 and Fig. 7)
FIguRe 6:
8. Next pull back the floor piece to access the hook fastener. (Fig. 8) Clean surface with alcohol then
remove the film backing from both pieces and roll the floor back into place. Firmly press the top
surface to ensure adhesive attachment, repeat as necessary until all pieces are attached.
FIguRe 4:
FIguRe 6:
FIguRe 8:
FIguRe 5:
FIguRe 7:
FIguRe 9:
Jeep Wrangler CJ-7/YJ Bedrug Install Instructions
CJ-7/YJ