Bedrug JEEP KITS: BedRug for Jeep CJ7/YJ - Manual (Page 4)

BEDRUG, INC.
n
635 Old Hickory Blvd, Old Hickory, TN 37138-3162
n
800-462-8435
n
bedrug.com
installing Front Floor PieCes
9. Adjust the front seats to the rear most position to allow maximum clearance for installation.
Place front floor pieces into place. (Fig. 10)
10. Once properly aligned, pull back part to access the hook fastener (Fig. 11). Clean surface with alcohol
then remove the film backing and roll the part back into place. Firmly press the top surface to ensure
adhesive attachment. Repeat for other front floor piece.
11. Next install the trans hump piece. Cut slits to fit piece over floor shifters as shown. (Fig. 12)
Once surface is clean, start on one side and remove film backing and fit into place ensuring that
the trans hump piece fits against the floor piece without a gap. (Fig. 13) Then repeat for other side.
FIguRe 10:
FIguRe 12:
FIguRe 11:
FIguRe 13:
Jeep Wrangler CJ-7/YJ Bedrug Install Instructions
CJ-7/YJ