Display setting 1, Online manual not for resale purposes – BLITZ R-VIT i-Color User Manual

Page 10

Advertising

Display Setting 1

①Adjust the contrast of the LCD screen using this function. The settings are from 0 to

100. However, to avoid extreme adjustment which causes the LCD to go blank. The

perimeters of the scale taking effect are within 25 to 75. Below or above this will not

take effect.

]

②Adjust the back light (Brightness) using this function. The settings are from 0 to 100.

③Adjust the dimmer using this function. The settings are from 0 to 100.

The Right, Left, Up and Down switches are automatically reconfigured by the LCD

direction.

Advice:

A multi angle function that can be chosen from Normal, Reverse and Vertical.

④Adjust the direction of the LCD.

The LCD display is basically made to be viewed horizontally. Therefore, the edges are

cut off when viewed vertically. We suggest to set the offset at the position used the

Advice:

⑤LCD Offset

It adjusts the offset of the LCD while viewed vertically.

A setting to display or not to display the red warning ○ at the Needle Meter.

Warning Mark

A setting to display or not to display the blue peak ○ at the Needle Meter.

Peak Mark

Online Manual Not For Resale Purposes

Advertising

Popular Brands

Popular manuals