Online manual not for resale purposes – BLITZ R-VIT i-Color User Manual

Page 18

Advertising

⑤Record / Replay Function

Press the DOWN switch for 3 seconds to start recoding.
Press the DOWN switch for 3 seconds again to stop recording.

If the peak value will turn red for 3 seconds if the value is updated while recording.

Press the DOWN switch to play the recorded data.
Turn the ENCODER to rewind or fast-forward while replaying.
Press the DOWN switch to stop replaying.
The maximum recording time will be about 10 Minutes and 9 seconds.

The recorded data will be erased if the IGN is turned OFF.

The peak value will not

be displayed while replaying.
Since all the items are recorded even if it not displayed, all the items can be replayed
by changing the displayed items setting.

MODE Explanation 4 (GRAPH)

①A/F Graph

It records and displays three memories of A/F graph based on RPM
Turn the encoder and the cursor will move right and left to display the A/F ratio at the intersecting point of the graph
line and RPM. Press the ENCODER and the recording channel will be highlighted. Turn the ENCODER to
select the channel number to record. Then turn the ENCODER to select the source (A/F 1, A/F 2, EXT) to be
recorded.
Press the RIGHT switch to cancel and return to the previous screen.
Press the LEFT switch to shift from night and day illumination and vice versa.
Press the LEFT switch for over 3 seconds to erase the memory. However, it will erase only the memory channel
marked with an

＊

The operation will be cancelled if any operation in not taken for over 10 seconds.
Press the UP switch to shift from A/F Graph / Meter Screen / Dual Digital Meter / Six Fold Meter / Fuel Injection
Trace / A/F Graph. Press the UP switch for over 3 seconds and it will scroll back wards.
Press the DOWN switch and only the graph will be displayed for 6 seconds for easier examination of the graph.

Main displaying data source

Online Manual Not For Resale Purposes

Advertising

Popular Brands

Popular manuals