Carbolite CDF 15/1b - Manual (Page 2)

CDF
2
MF56 – 1.03
1.0 S YMBOLS & W ARNINGS
1.1 Switches and Lights
1.2 Warning Symbols
2.0 I NSTALLATION
2.1 Unpacking & Handling
When unpacking or moving the furnace always lift it by its base. Never lift it by the door. Use two
or more people to carry the furnace where possible. Remove any packing material from the door
gear and furnace chamber before use.
NOTE: This product contains Refractory Ceramic Fibre (better described as Alumino Silicate
Wool) for precautions and advice in handling this material see the ‘Repairs and Replacements’
section.
2.2 Siting & Setting Up
Place the furnace in a well ventilated room, away from other sources of heat, and on a surface
which is resistant to accidental spillage of hot materials. Do not mount the furnace on an
inflammable surface.
Ensure that there is free space around the furnace. Do not obstruct any of the vents in the control
section: they are needed to keep the controls cool.
Ensure that the furnace is placed in such a way that it can be quickly switched off or disconnected
from the electrical supply - see below.
DANGER of electrical shock– read any warning printed by this symbol.
DANGER – hot surface. Read any warning printed by this symbol.
WARNING: all surfaces of a furnace may be hot.
DANGER – read any warning printed by this symbol.
Heat Light: the adjacent light glows or flashes to indicate that power is
being supplied to the elements
Instrument switch: when the instrument switch is operated the temperature
control circuit is energised.