COATS 6275HS Truck Wheel Balancer User Manual
Page 7
I 0708
-
6
16
9
7
15
13
10
14
12
6
6
6
1
2
3
4
8
6
11
5
17
18
GB
4 - CONTROLS AND COMPONENTS
4.1 - CONTROL PANEL AND DISPLAY
►
1-2
Digital readouts, AMOUNT OF UNBALANCE,
inside/outside
3-4
Digital readouts, POSITION OF UNBALANCE,
inside/outside
5
Indicators, correction mode selected
6
Indicators, selection made
7
SPLIT push button (unbalance resolution)
8
Push button, ounces/grams selection
9
Push button, selection of mode of correction
10
Push button, car/truck selection
11 Position
repeat
12
Push buttons, manual dimensions setting
13
Push button, menu selection confi rmation
14
EXIT/emercency push button
15
Push button, FUNCTIONS MENU
16
Push button, unbalance reading < 5 g (0.25 oz)
17
Minimize/MENU button
18
Maximize/MENU button
O
N
▪
LY
USE
THE
FINGERS
TO
PRESS
THE
PUSH
BUTTONS
.
N
EVER
USE
THE
COUNTERWEIGHT
PINCERS
OR
OTHER
POINTED
OBJECTS
.
▪
4.2
►
- AUTOMATIC DISTANCE AND DIAMETER GAUGE
This gauge allows measurement of the distance of the wheel from the machine and the wheel diameter at the point
of application of the counterweight. It also allows correct positioning of the counterweights on the inside by using the
specifi c function (see
INDICATION OF EXACT CORRECTION WEIGHT POSITION
) which allows reading the position used
for the measurement within the rim.
4.3 - WHEEL LIFTING LEVER
►
Allows lifting the wheel from the ground without using a lift in order to spin it.
It also allows lowering the wheel until it touches the ground in order to stop rotation.
4.4 - MANUAL SPINNING LEVER
►
Allows spinning the tyre. When the machine display turns off, it means that the minimum spindle rotation speed has
been reached to perform correct balancing (70 rpm. for trucks and 100 rpm. for cars). At this point, release the handle
and wait until the unbalance measured appears on the display. If the beep function is enabled (see
MENU
), a beep
will sound when the correct balancing speed is reached.