Warning danger warning caution – COATS 700 Solid State Wheel Balancer User Manual

Page 5

Advertising
background image

Definitions of Hazard Levels

Identify the hazard levels used in this manual with the
following definitions and signal words:

DANGER
Watch for this symbol:

It Means: Immediate hazards which will result in
severe personal injury or death.

WARNING
Watch for this symbol:

It Means: Hazards or unsafe practices which could
result in severe personal injury or death.

CAUTION
Watch for this symbol:

It Means: Hazards or unsafe practices which could
result in minor personal injury or product or property
damage.

Watch for this symbol. It means BE ALERT!
Your safety, or the safety of others, is
involved.

Owner’s Responsibility

To maintain machine and user safety, the

responsibility of the owner is to read and follow these
instructions:

• Follow all installation instructions and make sure

installation conforms to all applicable Local, State,
and Federal Codes, Rules, and Regulations; such as
State and Federal OSHA Regulations and Electrical
Codes.

• Carefully check the unit for correct initial function.

• Read and follow the safety instructions. Keep them

readily available for machine operators.

• Make certain all operators are properly trained,

know how to safely and correctly operate the unit,
and are properly supervised.

• Allow unit operation only with all parts in place and

operating safely.

• Carefully inspect the unit on a regular basis and

perform all maintenance as required.

• Service and maintain the unit only with authorized

or approved replacement parts.

• Keep all instructions permanently with the unit and

all decals/labels/notices on the unit clean and
visible.

COATS 700 Balancer • v

Failure to follow danger,
warning and caution
instructions may lead to

serious personal injury to operator or bystander,
or damage to property. Do not operate this
machine until you read and understand all the
dangers, warnings and cautions in this manual.
For additional copies of either, or further
information, contact:

Hennessy Industries
1601 J.P. Hennessy Drive
LaVergne, TN 37086-3565
615/641-7533 or 800/688-6359
www.ammcoats.com

WARNING

DANGER

WARNING

CAUTION

Advertising