Bosch DiBos - Manual (Page 25)

– 25 – BOSCH Security Systems GmbH A1 02.03
Connection with a remote station
You are now on the live image
Establish From the Connection menu, select the
connection Connection command.
The Connection dialog box opens.
Select the desired connection type, e.g.
ISDN/network.
Click on the remote station in the list box and
confirm with OK.
The connection to the remote station is
established.
Select In the image window, on the icons for the
camera individual cameras to see their images. On the
Display menu, you can display several cameras
per remote station simultaneously.
From the Camera menu, select the Camera
switchover command.
The Automatic camera switchover dialog box
opens.
In the dialog box, specify the cameras that should
be affected by the switchover. If necessary,
consult the online Help.
Control From the Relay menu, select the Relay...
relay command. The relay output is controlled (e.g. light
outputs on). Clicking the command again will reset the
control procedure.
Disconnect On the Connect menu, click the Disconnect
command and confirm the query as to whether you
really want to disconnect with Yes.
Looking at live images, performing control procedures on a
remote station