Bosch DiBos - Manual (Page 9)

– 9 – BOSCH Security Systems GmbH A1 02.03
Existing / approved cameras will be
displayed in live image.
Display of the existing / approved cameras
Basic window toolbar / connection window in live image
The Status bar (lowermost line of the screen) contains help
information about the menu you are currently using. It shows the
name of the remote station to which an external connection has just
been established.
The Title bar contains:
– the window title with the name of the selected station and
– the buttons to minimize, maximize and close the window.
Clicking minimizes the window and places it at the bottom
edge of the screen.
Clicking restores the window to normal size.
Terminates the existing connection
Configured alarm inputs are displayed
in the live image
On the left side of the screen, you will find a list of the configured
cameras.
The lower portion of the image displays all configured alarm inputs.
Status display of the configured alarm inputs
The statuses of all configured alarm inputs are displayed as follows.
no icon Input is in standby
Input has triggered
? Input does not exist as hardware
Display of the configured alarm inputs
Contact input or video motion detector of
a camera
Foyer card reader / barcode reader
Configured relay outputs can be activated
and deactivated by clicking with the right
mouse button
on