Bosch DiBos - Manual (Page 3)

– 3 – BOSCH Security Systems GmbH A1 02.03
Introduction and safety instructions
Service station:
Telephone:
What do these operating instructions tell you?
These operating instructions provide you with all relevant information that
you need in order to perform the tasks described in the table of contents
quickly and easily.
You will find more detailed information about the respective screens online
on your system if you press the F1 key or click the Help button.
Caution!
To avoid electrical shock, do not remove the cover. Leave all
maintenance to qualified personnel.
Warning!
To avoid fire or electrical shock, never expose the device to rain or
humidity.
Warning!
Installation should only be undertaken by qualified customer service
personnel in accordance with all applicable electrical regulations.
Power connection!
Devices with or without power cords have voltage in the device as
soon as the power cord is plugged into the outlet. However, the
device is only ready for use if the power switch (ON/OFF) is on ON.
If you unplug the power cable from the outlet, the voltage supply to
the device is completely halted.
Notes on cleaning
When cleaning the surface, be sure that you do not use any
caustic or scrubbing cleansers and that no liquid gets inside the
device.
The device may only be operated by trained
persons! For security reasons and in order to avoid faulty
operation, any authorization code required for operation
should only be communicated to these persons.
Note
It your are not able to accomplish some of the described steps of
this manual, it may be that you don’t have the rigth authority level.
In this case please contact your authorized dealer.