COATS APX Rim Clamp Tire Changer - Manual (Page 23)

Unload and Installation
Instructions
Review the following unload and installation proce-
dures carefully. Refer to them as necessary when the
machine is delivered, unloaded and installed to verify
that you are proceeding properly and safely.
This unit weighs over 1,200 lbs. Do not
attempt to lift or move without assistance.
Make sure all moving parts are secured
before moving the unit.
Proper unit installation is necessary for safe
use and efficient operation. Proper installa-
tion also helps protect the unit from dam-
age and makes service easier. Always place
safety poster and instructions near the unit.
Machine Delivery Unload Procedure
A. It is acceptable to use a fork-truck to unload the
machine from a delivery truck.
B. It is acceptable to use a utility tilt trailer to unload
the machine that is on a pallet from a delivery truck.
C. It is not acceptable and can be dangerous to use
a lift-gate delivery truck to unload the machine from a
delivery truck.
Important: Always read and follow the operating instructions. • 19