COATS APX Rim Clamp Tire Changer - Manual (Page 7)

Important: Always read and follow the operating instructions. • 3
K
Important Safety Decal — Important safety infor-
mation for the operator. DO NOT obstruct with tire
stickers or other materials.
L Tire Lift Control Pedal — Three position pedal that
raises or lowers the tire lift ramp.
M
Clamp Control Pedal — Three-position pedal that
opens, holds, or closes rim clamps.
N
Tower Tilt Pedal — Two-position pedal that moves
tower forward or back.
O Tabletop Pedal — Three-position pedal that controls
rotation of tabletop (forward, off, reverse).
P Inflation Pedal — Three-position pedal that allows
inflation of tires through air hose and clip-on chuck.
R
Bead Sealing Nozzles — Expands tire sidewall to
bead seat area of rim to seal tire to rim and allow
inflation..
S
Lube Bucket —Dispenser for rubber lubricant.
T
Bead Lifting Tool — Used to lift and position tire
bead correctly on duckhead
® .
U
Lube Bottle —Dispenser for rubber lubricant.
W
Tower —Support for horizontal and vertical slides.
X
Slide Locking Valve — Locks and unlocks horizon-
tal/vertical slide and sets correct vertical/horizontal
position to maintain duckhead/wheel clearance.
Y Air Inflation Gauge —Registers tire pressure when
clip-on chuck is attached to tire valve stem and infla-
tion pedal is released.
Z
Release Valve — Allows the manual release of air
pressure from tire when clip-on chuck is attached to
tire valve.
O N
P
S
K
L
M
U
W Z Y
T
X
R