COATS APX Rim Clamp Tire Changer - Manual (Page 24)

20 • Important: Always read and follow the operating instructions.
APX90 Unload Instruction
1. Remove lag bolts holding chassis to pallet.
2. Jack up rear of machine; install axle and wheels as
shown.
3. Remove ramp planks and position as shown.
4. Move jack to front (add air pressure to machine).
5. Slowly push machine off pallet.
6. Locate machine in shop at proper location and
remove wheels.
APX90
2
5 4
Secure ramp planks
in position with screw
as shown.
3
DO NOT Fork Machine
Here: Transmission
Damages May Occur