Condux WDR505 Underground Pulling Trailer - Manual (Page 9)

9
Transporting
A. MACHINE LIFTING
For machine lifting use only devices (overhead traveling cranes, lift trucks, ropes,
cables, hooks, etc.) with a capacity equal to the weight to be lifted.
Personel should not be on the machine when it is lifted.
!DANGER: Failure to follow the recommendations in this section
may create a dangerous situation and/or damage to the machine.
The manufacturer’s warranty may also become void as a result.
B. PACKAGING FOR SHIPMENT
Transport by land by truck
Certain surfaces may be protected by cardboard and/or plywood and/or
polyethylene film.
To prevent movement, use nailed wheel chocks. Attach the machine to the floor
of a truck box or trailer using chains and hooks at the attachment points provided.
C. UNPACKING
When receiving the machine verify the condition of the package; immediately
notify the transportation company and the manufacturer (use photos whenever
possible) of any damage that may have occurred during shipment.
Verify that the supplied product matches that which was ordered; immediately
advise the manufacturer if there is a discrepancy.
Use caution when unpacking to avoid damaging the product.
!CAUTION: Disposal of all packaging materials must be in
accordance with local regulations.
D. TOWING
This machine is designed for towing at highway speeds. No personnel may ride
on the machine at any time while towing the machine at ANY speed.
3.
4.