Step 4: basic controller configuration – Brocade Communications Systems Brocade FastIron CX Series FCX624S-HPOE User Manual
Page 11
ENTERPRISE & MOBILITY
DEPLOYMENT GUIDE
Deploying Brocade Mobility Products with the Brocade FastIron CX Series
Page 11 of 16
4. Enter Configuration Mode:
BR-RFS7000#conf t
Enter configuration commands, one per line. End with CNTL/Z.
BR-RFS7000(config)#
5. Change the host name:
BR-RFS7000(config)#hostname RSL_BR-RFS7000
RSL_BR-RFS7000(config)#
6. Add the management IP address to VLAN 1:
RSL_BR-RFS7000(config)#int vlan 1
RSL_BR-RFS7000(config-if)#management
-
For DHCP (default): RSL_BR-RFS7000(config-if)#ip address dhcp
-
For Static IP: ip address 10.1.1.2/24
Step 4: Basic controller configuration
1. Connect to the RFS7000 with HTTP.
a. Open IE Explorer (HTTP 1.1 disabled) with the IP address learned from DHCP or set it statically
.
b. Enter a user name (admin) and password (admin123).