What’s in the box – Brocade Communications Systems Brocade FastIron CX Series FCX624S-HPOE User Manual
Page 7
ENTERPRISE & MOBILITY
DEPLOYMENT GUIDE
Deploying Brocade Mobility Products with the Brocade FastIron CX Series
Page 7 of 16
W
HAT
’
S IN THE
B
OX
Brocade FCX 624S-HPOE
• Brocade FastIron CX device
• 115V AC power cable (for AC sourced devices)
• Rack-mount brackets
• Warranty card
• A straight-through EIA or TIA DB-9 serial cable (F/F).
Brocade RFS7000
• Mobility RFS7000 Controller with rack brackets installed
• Console cable
• Deploying Brocade Mobility Products with the Brocade FastIron CX Series (this document)
• China RoHS compliance document
Brocade AP300 (internal antenna)
• Brocade Mobility 300 antenna
• 2 x screws
• 2 x wall anchors
• Quick Installation Guide (hardware only, no configuration)
Brocade AP7131
• Mobility 7131 model access point (accessories depend on SKU ordered)
• Deploying Brocade Mobility Products with the Brocade FastIron CX Series (this document)
• Wall mount screw and anchor kit
• Accessories Bag (4 x rubber feet, LED light pipe, badge with label for above-the-ceiling installation)
• China RoHS compliance addendum
Brocade AP5181
• Mobility 5181 802.11 a+bg dual-radio access point
• Deploying Brocade Mobility Products with the Brocade FastIron CX Series (this document)
• Set of cable connectors
• 3 x antenna connector dust covers
• 2 x connector cover AP67 jacks, plus chain_LTW-M9/14-SB
• Waste Electrical and Equipment (WEEE) addendum