Brocade Communications Systems Brocade FastIron CX Series FCX624S-HPOE - Manual (Page 15)

ENTERPRISE & MOBILITY DEPLOYMENT GUIDE
Deploying Brocade Mobility Products with the Brocade FastIron CX Series Page 15 of 16
4. Enter the LAN submenu:
admin(network)>lan
admin(network.lan)>
5. Enable LAN1:
admin(network.lan)>set lan 1 enable
admin(network.lan)>
6. Set the access point as a DHCP client:
admin(network.lan)>set ip-mode 1 client
If you are using a DHCP client, go to Step 4.
7. Set a static IP address:
a. Set interface IP mode to static & assign IP address
admin(network.lan)>set ip-mode 1 static
admin(network.lan)>set ipadr 1 10.1.1.3
b. Set Default Gateway IP address
admin(network.lan)>set dgw 1 10.1.1.254
c. Set Domain Name
admin(network.lan)>set domain 1 SEHD.com
d. Set Domain Name Server
admin(network.lan)>set dns 1 1 10.1.1.100
Step 4: Configuring controller pairing (DHCP not used)
1. Connect to the RFS7000 with HTTP:
a. Open IE Explorer (with HTTP 1.1 disabled) with the IP address learned from DHCP or set statically
(http://10.1.1.3/).
b. Enter the user name (admin) and password (admin123).