BKI FW-15L - Manual (Page 16)

Sandwich/Fry Warmer Maintenance
14
4. Allow the equipment to cool to room temperature.
5. Remove and clean the Fry Warmer blower pan and pan insert.
6. Clean around the slotted holes at the air discharge on the blower box.
7. Clean the air intakes using a mild soap and water solution.
8. Sponge the inside and outside of the unit with a mild soap and water solution, being sure to clean all
areas. Avoid getting water in the interior of the unit.
9. Wipe the parts and unit dry with a soft, clean cloth and replace the blower pan and pan insert.
Troubleshooting
Problem Cause Possible Solution
Sandwich Warmer and/or
Fry Warmer will not turn on. Power cords not
connected or circuit
breaker supplying power
to the unit has tripped. Make sure power cords are connected and circuit
breaker is on. If problem persists contact a
licensed electrician.
Product is not holding it’s
temperature Product temperature is
too low when loaded.
Or
Faulty component in
heating circuit Make sure product is above 160
° F when loaded.
Contact an authorized BKI service agent for
corrective action.
Fry Warmer
Warmer chute is not
heating and perforated pan
is not heating No power to unit. Make sure that the circuit breaker at the power
supply is on and the Fry Warmer main power
switch is on. If problem persists, contact licensed
electrician.
Warmer chute is heating
and the perforated pan is
not heating Fan has overheated and
cut off
Or
Heating coil has failed Wipe the dust from the air intake louvers to allow
proper airflow and prevent fan overheating. Turn
the power switch off. Wait 60 seconds. Turn the
power switch back on.
Contact an authorized BKI service agent for
corrective action.
Noisy fan Fan blade is dirty or fan
bearings are failing Contact an authorized BKI service agent for
corrective action.
Warmer chute is not
holding heat Ceramic heating
element failure Contact an authorized BKI service agent for
corrective action.
Sandwich Warmer
Warmer is not heating No power to unit
Or
Faulty component in top
or bottom heating circuit. Make sure that the circuit breaker at the power
supply is on and the Sandwich Warmer main
power switch is on. If problem persists, contact
licensed electrician.
Contact an authorized BKI service agent for
corrective action.