CounterPath Bria 4 Windows User Guide - Retail Deployments - Manual (Page 76)

CounterPath Corporation
72
Domain Proxy
Register with domain and receive
calls Check this box if you want to register with your VoIP service provider, so that you can receive
incoming calls.
Typically, this field is checked.
This field must be left unchecked if, for example, your level of service does not include the
ability to receive incoming calls. (In that case, turning this field on may cause the account to
fail to be enabled).
Send outbound via Choose the setting specified by your VoIP service provider:
• Domain: If your VoIP service provider requires that traffic be directed to proxies that are
discovered via the domain.
• Proxy: If your VoIP service provider has an outbound proxy address and requires that you
provide the address to Bria. For the address, enter a domain name (for example,
domain.com) or an IP address (for example, 123.456.789.012).
If you are using Bria in a test lab, it is possible that neither of these settings is suitable; see
page 83 for a third way to direct traffic.
Dial Plan Information about the syntax of the numbers used by this VoIP service provider.
Provided by the service provider. The default plan is:
#1\a\a.T;match=1;prestrip=2;
For information on determining whether you need to modify the default dial plan, see
page 101.
Table 2: SIP Account Properties – Account
Field Description