CounterPath Bria Professional 2.4 User Guide - Manual (Page 19)

Bria Professional 2.4 for Windows User Guide
15
If You Do not Select an Account – Auto Account
If you have more than one account enabled and if you do not select the account, Bria Professional selects the
account to use to place the call as follows:
• If a dial plan exists for any account, Bria Professional runs through the dial plans to determine if the dialed
number matches any of these plans. If a match is found, the account that the dial plan belongs to is used.
Your system administrator will have already set up suitable dial plans.
• If there is no match on any dial plans or if no dial plans are defined, then the default account is used. The
default account is the account listed first in the Account Settings window (page 62).
Encryption
The outgoing call may be encrypted, depending on your security settings.
• If an encrypted call is established, the encryption icon ( ) appears on the call display. This icon indicates
that the call is guaranteed to be secure between you and your proxy, and may or may not be secure beyond
that first hop.
• If an unencrypted call is established, no encryption icon appears.
• If the call cannot be established with the specified security, the call will fail.
Ending a Call
Click End on the Call panel. Details of the call remain on the call display. To clear the details of the call from
the display, click Clear.