The following faults are possible, 5 what to do if – Eberspacher EasyStart Remote User Manual
Page 16
Advertising
16 | VehiCLe heATeRs – TeChniCAL DOCuMenTATiOn
5 WhAT TO DO iF …?
the fOllOwing faults are pOssible
FAuLT
pOssibLe CAuses
ReMeDy /CusTOMeR
The mobile unit cannot
be activated
battery dead.
Replace battery (
).
no battery inserted.
insert battery (
).
battery inserted wrong way
around.
insert battery correctly (
LeD at the button flashes stationary unit is in learn mode.
The display switches itself off
after 30 seconds or teach the
mobile unit as described in the
installation instruction.
please nOte!
if you are unable to remedy the error or fault,
please contact an authorised je workshop or
dial the following service phone number.
Advertising