Eberspacher EasyStart Remote - Manual (Page 9)

VehiCLe heATeRs – TeChniCAL DOCuMenTATiOn | 9
switch On the heater
heATing OR VenTiLATiOn
press the button, the connection is set up
with the stationary unit is.
Data transmission
LeD: lights up green

LeD: flashes 12x
green
The heater is switched on.
Operating time 30 minutes (factory setting)
please nOte!
The following action is possible during opera-
tion:
Query the operating state of the heater
(
see page 10 ).
switch Off heater
heATing OR VenTiLATiOn
press the button, the connection is set up
with the stationary unit is.
Data transmission
LeD: lights up green

LeD: flashes 12x red
The heater is switched off.
please nOte!
The following actions are possible after
switching off:
switch heater back on again.
Change operating time (see from page 10 ).
switch to heATing or VenTiLATiOn.
(
from page 12 ).
3 OpeRATiOn AnD seTTing/ADjusTMenT