ECOXGEAR C2CDRW: Retrowriter - Manual (Page 13)

3 Press the PROGRAM button.
The track is programmed, and “P-02” is displayed.
Repeat steps 2 and 3 to program more tracks.
 You can program up to 32 tracks.
 To cancel the program mode, press the STOP button ( ) .
4. When the selection of track numbers has been finished, press the PLAY button ( ) to
Start program playback.
To check the programmed order
In the stop mode, press the MUSIC SKIP button repeatedly to show the track numbers
that have been stored in memory.
To add a track to the end of the program
In the stop mode, press the PROGRAM button.
Select a track number by pressing the MUSIC SKIP button, and then press the
PROGRAM button.
The track is added to the end of the program.
To delete the last track from the program.
In the stop mode, press the CLEAR button to delete the last track from the program.
To clear the program
If one of the following buttons is pressed, the programmed contents will be cleared:
OPEN/CLOSE, AM/FM, PHONO, AUX, STOP in the stop mode.
REPEAT SHUFFLE
PROGRAM
OPEN/ CLOSE
CLEAR
DISPLAY PHONO
RECORD
AUX
RADIO
CD
REC VOL- REC VOL+
MANUAL/ AUTOINCREMENT INCREMENT TRACK FINALIZE ERASE
VOL-
VOL+
Program
REPEAT SHUFFLE
PROGRAM
OPEN/ CLOSE
CLEAR
DISPLAY PHONO
RECORD
AUX
RADIO
CD
REC VOL- REC VOL+
MANUAL/ AUTOINCREMENT INCREMENT TRACK FINALIZE ERASE
VOL-
VOL+
REPEAT SHUFFLE
PROGRAM
OPEN/ CLOSE
CLEAR
DISPLAY PHONO
RECORD
AUX
RADIO
CD
REC VOL- REC VOL+
MANUAL/ AUTOINCREMENT INCREMENT TRACK FINALIZE ERASE
VOL-
VOL+
REPEAT SHUFFLE
PROGRAM
OPEN/ CLOSE
CLEAR
DISPLAY PHONO
RECORD
AUX
RADIO
CD
REC VOL- REC VOL+
MANUAL/ AUTOINCREMENT INCREMENT TRACK FINALIZE ERASE
VOL-
VOL+
Clear
24 25
NO TOC CD-RW
PROGRAM
CD
TR
CD-RW
CD
TR