ECOXGEAR IRC6000: Mondo - Manual (Page 17)

17
Step 2 - Connect to the wireless network
Select the ESSID for your wireless network from the list of networks and press the Menu knob.
If your network is not configured to require a password (encryption code), the screen should display
Then if either a WPA or a WEP password is required you should briefly see the following screen.
This indicates that the network is using one of the encryption systems: Wired Equivalent Privacy (WEP)
or Wi-Fi Protected Access (WPA or WPA2). You therefore need to enter the correct WEP or WPA
password on your MONDO radio to communicate with your network.
Only the person who set up the network initially knows this password; If that person is not please
consult the individual or company that set up your home or office network. You may also want to
contact Customer Service of your internet provider or the manufacturer of your wireless router to obtain
a default password they may have programmed.