ECOXGEAR IRC6000: Mondo - Manual (Page 39)

39
Settings
You are able to adjust various settings on your Grace Mondo Radio. These can be found by selecting
the ‘Settings’ icon from the Home page of the radio.
Please Note If you make a mistake at any point, press the ‘Back’ button to go back to the previous
screen.
Network Configuration
Enables you to scan again for connection to another wireless network, or to manually configure the
network parameters. Use this if you take the Internet radio to another building where you want to use it,
or if you change your wireless router.
Properties
Details of the exact software release, serial numbers and other radio specifications.
Stereo Mode
Set the radio to Mono or Stereo. By default from the factory the radio is set to Mono to optimize the
performance of the single speaker. Choose Stereo if you regularly listen via the headphone jack and
would prefer a Stereo listening experience out of the headphone.
Network Firmware Upgrade
Use this option to download new firmware for the radio from the Grace Digital Audio portal on the
Internet. If there is new firmware available, then the radio will prompt you If you want to download it or
not. Note, at this stage, you can press the radio’s ‘Back’ button to cancel the radio beginning a firmware
upgrade.
Important Note A Firmware upgrade may take several minutes, so do not switch off the power to the
radio until the operation is complete otherwise the radio may become permanently damaged.
Speaker
Use this control to switch off the speaker. This feature is useful if you are using the RCA out to route the
audio to your HiFi. You can simply mute the speaker or turn it off with this features.
Language
This control allows you to change the display language. After you change the language the radio will
reboot.