ECOXGEAR IRC6000: Mondo - Manual (Page 40)

40
Factory Reset
Puts all the settings back to their defaults as they were when the unit left the factory. If you perform a
factory reset on your radio you will lose all your presets and your wireless network connection.
Please note that your radio’s serial number will still be registered with your Grace Digital internet radio
account (assuming you already registered the radio). Any premium station passwords, my stuff stations
and podcast that were saved on our web site will be saved and re-associate with your radio after you
power back on, log onto your network.
Hard Reboot
Selecting this menu item will reboot the radio. You can also reboot the radio By unplugging and pressing
and holding the power button until the display turns off, then release the power button.
Register
This will display a key that can be used to register the radio on the Grace Digital Audio Customer portal:
grace.reciva.com . See the ‘Registering your radio’ section of this user manual for more details.
Clock Set up
Change the time format of the radio, and set the local time zone.
Backlight
Selecting this option will alter the Internet radio’s backlight brightness. Note that in Standby mode you
can use the Menu knob to adjust the back light up or down.
1. After selecting the ‘Backlight’ menu item, the radio will display its list of three menu modes: ‘Inactive’,
‘Active’ and ‘Standby’. These three states are explained below:
• The radio gets into its ‘inactive’ state when there is no button pressed for 30 seconds.
• The ‘active’ state is when there is user activity.
• ‘Standby’ is the state when the radio has been turned off. The standby back light setting can be
reduced to zero (a blank screen).
2. Rotate the knob to highlight the desired menu mode and press SELECT.