Elkhart Brass Vulcan 8593-xx EXT - Manual (Page 12)

Page 12
3. 81327201 Secondary Panel Mount
Transmitter
(Figure 10) The fixed transmitter sends signals to the
monitor via an encoded radio signal, requiring no
wires between the transmitter and the monitor. It is
powered by the vehicle electrical system. The
faceplate is intended for a flush mount onto the
pump or aerial ladder control panel. Separate sealed
push button switches are provided for up, down, left,
right, fog, and stream functions. Comes with 10 foot
coax antenna cable and (1) 90° antenna and (1)
straight antenna.
Figure 10
81327201 Secondary Panel Mount
Transmitter
4. 81353101 OEM Primary Transmitter
(Figure 11) The OEM transmitter allows the
monitor installer to use their switching arrangement
while still having the benefit of the W.E.T. It has
all of the same features of the Primary Panel Mount
Transmitter, but has a wiring harness for the
installer to connect to the switches. Comes with 10
foot coax antenna cable and (1) 90° antenna and (1)
straight antenna.
5. 81353201 OEM Secondary Transmitter
(Figure 11) The OEM transmitter allows the
monitor installer to use their switching arrangement
while still having the benefit of the W.E.T. It has
all of the same features of the Secondary Panel
Mount Transmitter, but has a wiring harness for the
installer to connect to the switches. Comes with 10
foot coax antenna cable and (1) 90° antenna and (1)
straight antenna.
Figure 11
81353101 and 81353201
OEM Transmitter
6. 81549001 Secondary Switch Box
Control for Aerial Applications
(Figure 12) This component is a surface mount
type switch box with controls for operation of the
monitor for use with the OEM transmitter.
Separate sealed toggle switches are furnished for
up-down, left-right, and strt-fog functions. The
box has a NEMA 4 rating. It is generally installed
at the tip of the aerial ladder or in the bucket of the
aerial platform. A terminal strip inside the
enclosure allows for connection of the control
cable, and a watertight strain relief fitting provides
for sealing around the cable entry.
Figure 12
81549001 Secondary Switch Box Control