Elkhart Brass Copperhead 8593-IV - Manual (Page 5)

5. Valve Handle Orientation (Lever Handle)
The 8593-IV has been designed such that the valve handle may be oriented in any
one of eight possible positions that are incremented by 45 degrees. The handle may
also be oriented so that the valve opens in a clockwise or counter-clockwise rotation.
The following procedure describes proper orientation of the valve handle:
• Position the valve handle to the fully closed position
• Remove the hex bolt that attaches the valve handle (See Figure 2)
Figure 2
Hex Bolt
• Remove the handle assembly from the actuator shaft (See Figure
3)
Handle Assembly
Figure 3
Actuator Shaft
• If the direction of rotation is to be changed, remove the stop plate
from the actuator shaft, rotate 90 degrees with respect to the