Ball valve, I. introduction – Elkhart Brass Single Body Valves User Manual
Page 3
3
800.346.0250 • www.elkhartbrass.com
Elkhart Brass Single Body apparatus valves are specially designed for reliability, ease of installation and ease
of use.
BALL VALVE
• Single Body Ball Valves are available in 1.0” (SB10) & 1.5” (SB15) body sizes with integral direct or
remote actuators.
• The bodies are constructed of corrosion resistant brass, and the ball is constructed from durable
stainless steel.
• Dual self-adjusting seats provide bidirectional sealing.
• Adapters (end caps) are constructed of brass and do not require O-rings that could cut or tear during
servicing.
• Swing out construction allows for easy access to internal waterway.
• Handle position and direction of operation can be changed easily.
Single Body Valves meet or exceed NFPA 1901 Standards.
I. INTRODUCTION