Iv. quick installation guide, Adapters to valve body – Elkhart Brass Single Body Valves User Manual
Page 7
Advertising
7
800.346.0250 • www.elkhartbrass.com
IV. QUICK INSTALLATION GUIDE
1. Adapters to Valve Body
A) Move valve to close position. See Figure 1.
B) Tighten the four adapter bolts in an X pattern (see Figure 2) by first tightening all bolts to 1/2
their torque specs, and then tightening them to their full torque spec. This will help prevent
misalignment. See Table 2 for adapter bolt sizes and torque requirements.
Figure 2
Table 2 – Size & Torque
Ball in closed
position
Figure 1
Valve
Size
Torque
SB10
1/4 - 20
60-70 in-lbs
SB15
5/16 - 18
100-115 in-lbs
1
3
2
4
Advertising