Elkhart Brass UBEC 1AT AUTO TANK Fill System - Manual (Page 3)

3
PRODUCT SAFETY INFORMATION
 All personnel who may be expected to operate this equipment must be thoroughly trained in its safe
and proper use.
 Become thoroughly familiar with the hydraulic characteristics of this equipment.
 Always open and close valves slowly to avoid water hammer.
 After each use, and on a scheduled basis, inspect equipment per instructions in the maintenance
section.
 Keep fingers and hands clear of movings parts.
 Disconnect power before servicing and electric valve or electric valve controller.
 Use only mild dish soap to clean the controller.
 Any modifications to the electrical will destroy the NEMA 4 rating and void warranty coverage of the
enclosure and all components within.
Important:
Before installing and operating this equipment, read this manual
thoroughly. Proper installation is essential to safe operation.
SYSTEM INFORMATION:
SERIAL NUMBERS:__________________________________________________________________________
KIT DETAILS:
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________