Communications, Pulse-width modulation (pwm), Communications 4.11. pulse-width modulation (pwm) – ElmoMC SimplIQ Digital Servo Drives-Guitar Installation Guide User Manual
Page 74
Advertising
![background image](/manuals/558392/74/background.png)
Guitar Installation Guide
Technical Specifications
MAN-GUIIG (Ver. 1.601)
74
4.10. Communications
Specification
Details
RS-232
Signals:
•
RxD , TxD , Gnd
•
Full duplex, serial communication for setup and control.
•
Baud Rate of 9,600 to 57,600 bit/sec.
CAN
CAN bus Signals:
•
CAN_H, CAN_L, CAN_GND
•
Maximum Baud Rate of 1 Mbit/sec.
Version:
•
DS 301 V4.01
Layer Setting Service and Protocol Support:
•
DS 305
Device Profile (drive and motion control):
•
DS 402
4.11. Pulse-Width Modulation (PWM)
Feature
Details
PWM resolution
12-bit
PWM switching frequency on the load
2/Ts (factory default 22 kHz on the motor)
Advertising