ETC 2U and 3U Rack Mount Kit Setup Guide User Manual
E t c, 2u and 3u rack mount kits, 2u rack mounting instructions
E T C
®
S e t u p G u i d e
2U and 3U Rack Mount Kits
Rack Mount Kits
Page 1 of 3
Electronic Theatre Controls, Inc.
Corporate Headquarters
3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA
Tel +608 831 4116
Fax +608 836 1736
London, UK
Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK
Tel +44 (0)20 8896 1000
Fax +44 (0)20 8896 2000
Rome, IT
Via Pieve Torina, 48, 00156 Rome, Italy
Tel +39 (06) 32 111 683
Fax +44 (0) 20 8752 8486
Holzkirchen, DE
Ohmstrasse 3, 83607 Holzkirchen, Germany
Tel +49 (80 24) 47 00-0
Fax +49 (80 24) 47 00-3 00
Hong Kong
Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong
Tel +852 2799 1220
Fax +852 2799 9325
Service: (Americas)
(UK)
(DE)
(Asia)
Web:
Copyright © 2012 ETC. All Rights Reserved.
Product information and specifications subject to change.
7310M2220
Rev D
Released 2012-05
ETC intends this document to be provided in its entirety.
2U Rack Mounting Instructions
The 2U Rack Mount kit (7310A2024) may be used to mount either the Net3 Remote Video Interface
(RVI), Ion Remote Processor Unit (RPU), Congo Light Server (CLS) or the Net3 Project PC into a 19”
rack enclosure. Each product requires 2U of rack space. Both the front and rear mounting brackets are
required for a stable rack mounting installation.
Install Front Rack Mounting Ears
Step 1:
Remove the four rubber feet from the bottom of the unit.
Step 2:
Locate the rack mounting hardware kit including the mounting brackets and mounting
hardware.
Step 3:
Align the front side mounting bracket to the appropriate side of the unit and secure using
three 10-32 x .5 screws provided.
Step 4:
Install the opposite side front mounting bracket.
N o t e :
If you wish to change the label strips in the unit, you must do so before attaching the
rack mounting brackets.
Primary
Master
Backup
Sync
Client
Offline
Net3 RVI shown
rail adapter (x2)
kit includes (1) left side and (1)
right side for each bracket type
hardware
included
rear bracket
front bracket
Spring Clips
(optional)
Primary
Backup
Client
Master
Sync
Offline