ETC 2U and 3U Rack Mount Kit Setup Guide - Manual (Page 2)

E T C S e t u p G u i d e
Rack Mount Kits
Rack Mount Kits Page 2 of 3 Electronic Theatre Controls, Inc.
Install Rear Rack Mounting Ears
Step 1: Assemble the rear rack mounting brackets and the rail adapters together.
Step 2: Align the new rear mounting bracket assembly to the unit and secure using two 6-32 x .25
screws provided as shown below.
Step 3: Install the opposite side rear mounting bracket assembly.
Step 4: Use the remaining hardware to secure the unit into the 19” rack enclosure.
N o t e : Remember that the rear brackets are specific to the left or right side.
• Locate the two rear rack mounting brackets (left and right
side), the two rail adapters and four 10-32 x .5 screws from the
kit.
• Attach the rear brackets to the rail adapters as shown.
Primary
Master
Backup
Sync
Client
Offline