ETC Eos Family Show Control - Manual (Page 18)

16 Eos Family Show Control
• <Event> [2] [Cue] [1.5] [Time] [2][4][1][3] [Enter]
Event timing can also be modified within a range. Let's say an additional 5 frames needs to
be added to multiple events.
• <Event> [1] [Thru] [4] [Time] [+] [5] [Enter]
Adding Events From Live
Events can be added directly from live using the same conventions used in the Show Control
Display. The advantage to doing this from Live is there is no need to specify the event number, as
the console automatically assigns the number.
From the Live Display
Select the cue to execute.
• [Cue] [3]
Now define the time code location.
• [Cue] [3] {Execute} {Timecode} [3][2][1][5] [Enter]
Adding Events using Learn Mode
If you specify an event list within the show control display, you can press the [Learn] hardkey to
activate learn mode for that event list. When in learn mode, an event is created with the current list
time whenever a cue is activated, a submaster bump is pressed, or a macro is run. Once in learn
mode, the [Learn] key will remain lit to indicate that it is in learn mode. If the show control display
is exited, the console remains in learn mode until deactivated.
Multiple time code lists can be in learn mode simultaneously, each with their individual times. This
is accomplished by associating the event list and cue list together.
To exit learn mode, the console must be in the show control display. Once there, select the event
list then press [Learn] again. If [Learn] is pressed while viewing any other screen than the show
control display an empty event will be placed on all event lists that are in learn mode.
Open the show control display.
• [Displays]><More SK>>{Show Control} or [Browser]>{Show Control}
Select the event list to enable learning on.
• <Event> [1]
Press the [Learn] key.
• <Event> [1] [Learn]
In the Status column it now says Learning, and the [Learn] button is illuminated..
Execution While Editing
If the internal or external clock is running, events will fire, even if you are in the edit screen. As soon
as an event is created, the event list is resorted, and the new event is eligible for playback.
N o t e : You will notice as events are added to the event list, the time code will display on
the Playback Status Display.
N o t e : You will notice as events are added to the event list, the time code will display on
the Playback Status Display.