ETC Unison Mosaic RemoteManager v1.0.4 - Manual (Page 11)

Uploading and Scheduling
Uploading and Scheduling
Uploading
To upload files to a controller, you need to enter the IP address or domain name (e.g. mydomain.com) of the con-
trollers. This is done in the Installations browser as described in the
User Interface section. Any controller without
an IP address or domain name is shown in red. Double-click on the IP address or domain to edit it. You can also
edit the HTTP and FTP ports of the controller if these have been changed from the defaults.
If a controller is discovered on the network, the Online column will be set to Yes. If the discovered controller is not
the same type as specified in the installation template the online column will show Error.
To upload to an online controller, select it and click .
To upload to all online controllers at once, click .
If a controller is password protected, you will be prompted to enter the password for that controller. Any pass-
words that have been entered will be remembered for future uploads. For greater control of how passwords are
stored, see
Password Manager .
To terminate an upload that is in progress, select one or more controllers and click .
To terminate all uploads that are in progress, click .
If an upload fails, you can configure Unison MosaicRemoteManager to retry the upload in the Preferences . The
interval between uploads and the number of attempts to make before giving up can be altered.
Scheduling uploads
To upload to a controller, or multiple controllers, at a future time, select the controllers and click . You will be
prompted to specify when the upload should happen.
- 11 -