ETC Unison Mosaic RemoteManager v1.0.4 - Manual (Page 14)

Unison Mosaic RemoteManager User Manual
Password Manager
To open the Password Manager, click .
Controller passwords are stored hierarchically. If all controllers in an installation or an installation group have the
same password, you can enter that password at the relevant point in the hierarchy. If a controller has a password,
that password will take precedence over a password set for the installation; an installation password will take
precedence over a password set for the project template.
If a controller asks for a password when you are uploading, RemoteManager will first check if a password is set
for the controller, then if a password is set for the installation, and finally if one is set for the installation group. If
no password is found, or if the specified password is not accepted by the controller, you will be prompted to enter
a new password. Passwords entered at this prompt will be associated with the controller in the Password Man-
ager's hierarchy.
You can set a master password for the whole RemoteManager project file. If a master password is set, you will
be prompted for this the next time the file is opened. To set a master password for the whole file, enter the same
password in Master Password and Confirm Master Password. To change the master password after it has
already been set, press Edit. You will be prompted to enter the old password first.
Note: If you fail to enter the master password when the file is opened, you will still be able to open the file, but any
stored controller passwords will be erased and uploads to those controllers will only be possible by reentering the
passwords.
Press Show All to show the actual passwords. If a master password has been set, you will be prompted to enter
it before you can see the unobscured passwords.
- 14 -