ETC Unison Mosaic RemoteManager v1.0.4 - Manual (Page 9)

Installations
Installations
Adding an installation
To add an installation to the file, you must first define the installation's project template. Click .
If the file already contains installations, you will be offered a list of existing project templates that the new instal-
lation can join. If one of the existing project templates fits the new installation, select it and click OK. You can
specify a number of installations to add to create more than one at once.
To start a new template, click Create New Project Template.
The Project Template dialog allows you to define the controllers that exist in the installation, and to select files to
upload to those controllers.
To add a new controller, click .
To reorder the existing controllers in the template, select a controller to move and click or .
To remove one or more controllers, select them and click .
You can change the type and name of the controller in the Controllers table.
To select a file to upload to the controller, enter the file path in the File column of the table or click and select
a file. If the selected file is unsuitable for the controller, a warning will be displayed.
If the selected file for a controller references other files, for example, audio and video media, selecting the con-
troller will show these references in the Media table. In this table, you can select media files to upload to the con-
troller. If you select multiple controllers at once, you can set the media files on all of those controllers at the same
time.
Once the template is complete, click Ok. A new installation is created using that template.
- 9 -